Radiodetection Corporation

Search this category:
RD Marker LocatorsRadiodetections range of Precision locators features an Omni Antenna for the automatic detection of buried utility RF markers (power, water, sanitary, telephone, gas, cable TV and non-potable water) in addition to the utility locating options that are standard with the RD7000+M and RD8000+M locators.

For more information: RD7000+M.  RD8000+M.  Precision Marker Locator Range
PCMxCombined Current Mapper & Utility Locator. Detachable magnetometer foot. 8100PDLG locator when foot is removed. Simultaneous PCM & A-Frame surveys (ACCA & ACVG) Faster data collection & survey measurements Integrated GPS

For more information CLICK HERE.
SI100 Smart InterrupterSI100 is a solid state interrupter for corrosion technicians. The unit features GPS synchronization, advanced power management, high current switching capability, user programmability, circuit protection and compact physical size.

For more information CLICK HERE.
Stray Current MapperThe Stray Current Mapper (SCM) is a safe and cost-effective way of mapping the magnitude and direction of stray current interference on a pipeline. These are usually caused by third party cathodic protection systems (static interference currents) or DC electrified rail systems (dynamic interference currents).

For more information CLICK HERE
RD7100The RD7100 meets the everyday utility locating tasks featuring: Multiple Locate Modes and Frequencies and On-Screen Directional Compass to Pinpoint the Location of Underground Utilities, Sondes and Camera Heads.

For more information CLICK HERE.

M Versions include Universal RF Marker Locator.

For more information CLICK HERE.
RD8100The RD8100 is the most advanced Precision Locator available. Featuring optional GPS mapping; new Peak + and Guidance Locate Modes; and wide ranging Frequencies. On-Screen Directional Compass and ILOC (advanced Bluetooth link that allows remote control of the transmitter frequency and output level from the receiver). Versions include Universal RF Marker Locator and Optional On Board GPS.

For more information CLICK HERE.
C.A.T - Cable Avoidance Tool The C.A.T4 detects signals naturally radiating from metallic utilities or the Genny4 can be used to apply a distinctive signal for the C.A.T4 can detect.

For more information CLICK HERE.
RD5000WLDesigned for ease of use, the RD5000WL locator and RD5000WLT transmitter provide a single frequency location kit which is well-matched to the task of general utility locating. Left/Right Arrows guide the user to the target. Depth is automatically displayed. Compass aligns user with signal path and Clear TRACK processing engine rejects bleedover signals for accurate tracing.

For more information CLICK HERE.
RD7100 & RD8100The RD8100 and RD7100 can be used to locate wires faulted to earth with the accessory A-Frame. Precisely locate faults up to 2MOhm resistance.

For more information:
RD7100 CLICK HERE.
RD8100 CLICK HERE.
RD1500 Ground Penetrating RadarRD1500 takes subsurface investigations to the next level, offering users Depth Slices as well as Line Views.

For more information CLICK HERE
RD1100 Ground Penetrating RadarRD1100™ provides high-performance subsurface imaging for buried utilities in a rugged and competitively priced GPR system.

For more information CLICK HERE
MGD-2002Multi-Gas Leak Detector. Uses Helium or Hydrogen as a tracer gas to detect leaks in a pipe system.

For more information CLICK HERE.
GatorCam4 Push Rod SystemThe GatorCam4 is Radiodetection's push-rod inspection system suitable for inspecting pipes from 1" (25mm) to 8" (200mm) diameter. It benefits from a lightweight, rugged, water-resistant control unit with compact flash recorder and internal battery.

For more information CLICK HERE.
P350 FlexitraxPortable design meets big-pipe capability in Pearpoint’s P350 flexitrax crawler system, featuring intuitive joystick controls and a modular design enabling centralised surveys in pipes from 1 ¼” (32mm) to 36” (900mm)

For more information CLICK HERE.
Pearpoint P374isPearpoint's P374 IS is an intrinsically safe pushrod system certified to EEX ia IIC T6 for Zone 0 Hazardous environments such as vessels or pipework within the chemical and petrochemical industries, landfill venting systems, natural gas supply infrastructure, etc. The surface equipment is IP55 rated allowing this system to be used in most types of weather conditions. The P374 IS system is compact and fully integrated making it very easy to transport around.

For more information CLICK HERE
RD500 – Plastic Pipe LocatorThe RD500 is a locator for underground plastic water pipes. A transonde is used to vibrate the water sending a minute sound wave back along the pipe. This sound wave is then detected using the RD500 receiver locating the water pipe.

For more information CLICK HERE.
SondesTransmitting sondes allow receivers to trace non-metallic sewers, drains, ducts , pipes, etc. and to locate blockages or collapses. Pinpoint location and depth from the surface.

For more information CLICK HERE.
RD Lexxi T1660TDR Time Domain Reflectometer / Cable Test The Lexxi T1660 is an accurate, easy to use TDR for tracing first-line faults. Designed for First Responders, the Lexxi T1660 builds on RiserBond’s and Bicotest’s decades of TDR experience to provide a cable tester whose accuracy, range and resolution gives technicians the tool they need to find faults quickly and accurately. It can be used across a broad range of applications including telecom, CATV and even live 3-phase LV power cables via the optional Category IV Blocking Filter. For more information CLICK HERE.
Riser Bond 1205CXA The Riser Bond 1205CXA provides the CATV field technician with unparalled fault finding capability with state of the art performance and features. Compatible with Riser Bond’s WaveView Software for file storage and retrieval.

For more information CLICK HERE.
Riser Bond 3200The Riser Bond 3200 is a mid-range TDR for use on CATV cables. With a rechargeable battery and printer connectivity, the 3200 provides a cost effective and easy to use unit for technicians. Compatible with Riser Bond's WaveView Software for file storage and retrieval.

For more information CLICK HERE.
Riser Bond 1270AThe Riser Bond1270A offers the same features and performance of the 1205CXA with the addition of dual twisted pair inputs for testing Telecom circuits. Compatible with Riser Bond's WaveView Software for file storage and retrieval.

For more information CLICK HERE.
Bicotest T625The T625 TDR, originally designed by Bicotest for live power applications up to 600V-AC through dual fused blocking filters. A separate balance control tuner maximizes output and resolution for difficult faults. PC Windows software included.

For more information CLICK HERE.
Bicotest T272High resistance fault locator , originally designed by Bicotest, for faults upto 200 megaohms. Fault location is indicated as a percentage of total loop length with an accuracy of +/- 0.5%.

For more information CLICK HERE.
P571 Ex FlexicoilerPearpoint’s Ex flexicoiler is a fully integrated unit with explosion-proof down-hole equipment suitable for use in Zone 1 gas environments. Users have a choice of either the P415 forward-view camera or the P455 twin-view rotating camera, both of which are approved for use in Class I, Div 1, Gas Groups C & D, T3 environments – for Europe EX-d Group IIB T3. The P571 is ideal for applications such as sewer lines, search and rescue, pest control, chimneys and industrial applications.

For more information CLICK HERE
RD312 Metal DetectorThe RD312 locates buried or paved over metal covers. Rugged and durable, constructed with high impact ABS and aluminum. Easy to use for swiftly locating paved over manhole covers, valve boxes, etc.

For more information CLICK HERE.