Plastic Pipe Locators & Accessories

Plastic Pipe Locators & Accessories

Plastic Pipe Locators – Utility location is the process of identifying and labeling public utility mains that are underground. These mains may include lines for telecommunication, electricity distribution, natural gas, cable television, fiber optics, traffic lights, street lights, storm drains, water mains, and wastewater pipes.

In some locations, major oil and gas pipelines, national defense communication lines, mass transit, rail and road tunnels also compete for space underground.

Search this category:
Gas Line Tracer KitFiberglass rod with tracer wire and grounding with integrated Stuffing Box that locates live plastic lateral gas lines from meter to the main.
  • Stuffing Box connects to any riser’s shut off valve
  • No blow-by while feeding rod into live line • Small bullet tip guides rod from riser to lateral transition
  • Use transmitter and receiver to non-invasively trace gas line from above ground • Includes wire and clip for static grounding.

For more information CLICK HERE
Duct HunterUtilizing the heavy duty frame construction of our Buddy System® Rodders, the Duct Hunter™ features a copper trace wire in the rod to trace or map underground conduit or pipe without digging or trenching. • 5/16” and 7/16” rod diameter; 300’ to 1,000’ length • Trace to depths up to 10’ • Locate sewer laterals • Rigid frame and wheel construction • Rod’s ferrule attaches to sonde, roller guide or pulling eye • Accessory kit included • Bend Radius: 5/16” Rod 6” Bend; 7/16” Rod 9” Bend For more information

For more information CLICK HERE.
Water Line Tracer KitWater Tracer Unit has a fiberglass rod with tracer wire and Stuffing Box to locate live non-metallic water lines from the customer’s meter to the main water line or to the home. Stuffing Box does not leak water up to 100 PSI. Use with transmitter and receiver to trace line from above ground.
  • 3/16” rod diameter in 100’ to 300’ lengths • Locate any plastic pipe without a tracer wire
  • With an adapter, the stuffing box can be attached to the yoke which holds the meter

For more information CLICK HERE.
Gas Main Tracer KitElectrofusion Insertion Tapping Tee For 2” 4" & 6" Gas Main Line
  • Attach stuffing box to Electro-Fusion Insertion Tap Tee (patent pending)
  • Insert traceable rod into gas main with no blow by Use with transmitter and receiver to trace line from above ground.

For more information CLICK HERE
Jameson Directional Entry Tool
  • Enables vertical insertion of tracer rods and cameras
  • Facilitates the difficult first bend at entry
  • Works on live gas and water mains with no blow by
  • Compatible with keyhole procedures (fits 24” minimum keyhole)
  • Works on mains as small as 2”
  • Attaches to plastic or steel pipes
  • Rotates 360° to insert in either direction
  • Optimized for use with Jameson’s 1/4” Live Tracer For Gas Mains
  • Fits camera heads 1-3/8” or smaller
  • Works with commercially available saddles, valves, and tap tools
  • Includes heavy duty storage case
  • Patent pending design
For more information CLICK HERE
RD500 – Plastic Pipe LocatorThe RD500 is a locator for underground plastic water pipes. A transonde is used to vibrate the water sending a minute sound wave back along the pipe. This sound wave is then detected using the RD500 receiver locating the water pipe.

For more information CLICK HERE.
SondesTransmitting sondes allow receivers to trace non-metallic sewers, drains, ducts , pipes, etc. and to locate blockages or collapses. Pinpoint location and depth from the surface.

For more information CLICK HERE.
Clamp Extension StaffThe Model 720 – Clamp Extension Staff allows a signal clamp to be attached to the staff and extended to apply signal to a target conductor. The extension staff expands from 4’ to 8’ and is compatible with many manufacturers signal clamps.

For more information CLICK HERE